Short answer? Not easily, but any stone worktop can chip if you hit it hard enough or at the wrong angle. That goes for granite, quartz and sintered stone like Dekton alike.
It’s not a weakness of one brand or material. It’s just the nature of stone.
On our Kitchen Design Podcast I asked Katie Stone from Cosentino about chipping. Here’s what she told me.
- The edge is the weak point. Chips almost always happen on the edge of the worktop rather than the surface.
- A rounded edge helps. A more rounded profile means an accidental knock is more likely to glance off. Most people go for a pencil edge, which gives a little resistance compared with a sharp 90-degree corner.
- Watch the sink and the dishwasher. These are the high-traffic spots. Lifting heavy pans in and out of the sink, or not pulling the dishwasher drawers out fully, is where most little dinks happen.
- It’s classed as accidental. Katie told us no manufacturer would cover a chip, because it’s accidental damage. So a bit of care goes a long way.
Here’s the thing though… you don’t need to wrap your worktops in cotton wool. Lift pans up and over onto the drainer, pull the dishwasher drawers right out, and if you’ve got a busy family, pick a pattern that doesn’t show the odd chip so easily.
Get in touch, we’re always happy to help.